วันอังคารที่ 27 ธันวาคม พ.ศ. 2554

First Alert CO600 Plug In Carbon Monoxide Alarm

Product Description

Amazon.com Product Description

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don't know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you're in danger at first. That's why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can't see, smell or taste in the air. The First Alert CO600 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. Installation is as simple as plugging it in to any wall outlet. The test/silence button both silences a non-threatening alarm and allows you to test the unit's functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. UL listed.--Bree Norlander

buy now !!!

Kidde 0910 10-Year Sealed Lithium Battery-Operated Smoke Alarm with Memory and Smart Hush

Product Description

Amazon.com Product Description

No need to worry about faulty batteries with the Kidde 0910 10-Year Sealed Lithium Battery-Operated Smoke Alarm. This worry-free alarm contains a sealed-in lithium power supply that lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and battery costs over its lifetime.

buy  now!!!

Kidde KN-COP-IC Hardwire Carbon Monoxide Alarm with Battery Backup and Digital Display, Interconnectable

Product Description

Amazon.com Product Description

An essential device designed to protect you and your family from the dangers of carbon monoxide in your home, the Kidde KN-COP-IC carbon monoxide alarm can be installed on the surface of any wall or ceiling and hardwired into your home's electrical system. It also offers a digital display that shows the current carbon monoxide (CO) level at a glance as well as a battery backup. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it's never been a better time to safeguard your family against carbon monoxide exposure.

buy now!!!

Kidde 900-0234 Nighthawk Carbon Monoxide Alarm, Long Life AC Powered with Battery Backup and Digital Display

Product Description

Amazon.com Product Description

Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde 900-0234 Nighthawk Carbon Monoxide Alarm with Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO, and it has a digital display that shows CO levels in parts per million (ppm), allowing you to see if, how, and when levels change.

buy now!!!

วันจันทร์ที่ 26 ธันวาคม พ.ศ. 2554

Kidde KN-SMFM-i Silhouette Hardwire Low Profile Smoke Alarm

Product Description

Amazon.com Product Description

No need to worry about faulty batteries with the Kidde KN-SMFM-i Silhouette Low-Profile Smoke Alarm. This no-fuss alarm contains a rechargeable battery that runs off central electricity and lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and material costs over its lifetime. And because this alarm is interconnect-able, builders and do-it-yourself homeowners will quickly discover this is a must-have for remodels and new construction.This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

buy now!!!

Kidde p12040 Hardwire With Battery Backup Photoelectric Smoke Alarm

Product Description

Amazon.com Product Description

The Kidde P12040 is a 120VAC powered photoelectric smoke alarm with 9V battery backup. This advanced smoke alarm has the ability to function as a stand-alone unit or in an interconnected system. The Kidde P12040 includes a test button, quick-connect power harness and offers a 10-year limited warranty. This alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde model P12040 is a 120VAC powered alarm that includes a 9V battery backup to provide continuous protection during a power failure and included a quick connect power harness to make installation simple.


buy now!!!

First Alert CO615 Carbon Monoxide Plug-In Alarm with Battery Backup and Digital Display

Product Description

Amazon.com Product Description

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don't know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you're in danger at first. That's why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can't see, smell or taste in the air.
The First Alert CO615 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. Installation is as simple as plugging it in to any wall outlet. Its easy-to-read backlit digital LED display gives you a clear read-out of current CO concentrations in parts per million. The alarm includes a battery back-up giving you peace of mind in a power outage. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. An audible and visual low battery signal alerts you to replace the battery and an indicator alerts you when a battery has been removed. An end-of-life alarm of three chirps alerts you to replace the unit. One 9-volt battery is included. 5-year limited warranty. UL listed. --Bree Norlander


buy now!!!

Kidde KN-SMFM-i Silhouette Hardwire Low Profile Smoke Alarm

Product Description

Amazon.com Product Description

No need to worry about faulty batteries with the Kidde KN-SMFM-i Silhouette Low-Profile Smoke Alarm. This no-fuss alarm contains a rechargeable battery that runs off central electricity and lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and material costs over its lifetime. And because this alarm is interconnect-able, builders and do-it-yourself homeowners will quickly discover this is a must-have for remodels and new construction.This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

buy now!!!

First Alert SA511CN2-3ST ONELINK Wireless Battery Operated Smoke Alarm with Voice Location, 2-Pack

Product Description

From the Manufacturer

In the event of a fire every second counts. If a fire were to begin in your basement and the alarm there sounded, you may not hear it right away if you're sound asleep two floors up. With traditional battery-operated alarms, you lose valuable time waiting for the smoke to rise to another alarm, on another level, before the alarm on your floor sounds. But with First Alert ONELINK alarms, if one detects danger, they all sound. This can alert you sooner, and it increases your chances of getting out safely. Until now, alarms that could signal each other were only available in homes with hardwired alarms requiring installation from an electrician. But First Alert ONELINK alarms communicate without wires. ONE Link-with Voice Location Smoke alarm is programmable with up to 11 locations in your home - when alarm sounds it will tell you the location of the smoke. The wireless feature allows multiple alarms to talk to each other - when one alarm sounds, they all sound. The wireless network operates on 914 MHZ 3 channels and will not interfere with other electronics. The ONELINK smoke alarms uses photoelectric sensing technology which is environmentally friendlier and which reduces nuisance alarms, making it ideal for cooking areas. It is also great for sensing slow smoldering fires quickly. A low battery signal alerts you to replace the battery. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. The AA batteries are easy to install in the convenient pullout battery drawer. Two AA batteries included.

buy now !!!

Kidde i12020 Basic Hardwire Smoke Alarm with Test Button

roduct Description

Amazon.com Product Description

The AC-powered, hardwired Kidde i12020 ionization smoke alarm is designed to protect you and your family from the dangers of smoke and fire. This smoke alarm's trademarked hush feature allows you to silence nuisance alarms, while an indicator LED and test feature let you easily confirm that the alarm is working.
Kidde i12020
The basic Kidde i12020 smoke alarm wires into your home's electrical system.
At a Glance
i12020 Wire-In Smoke Alarm
At a Glance:
  • Ionization sensing technology detects invisible fire particles
  • Smart hush feature silences nuisance alarms
  • Pre-stripped wiring harness with tinned strands
  • 10-year limited warranty
At a Glance

Features

The Kidde i12020 smoke alarm offers a tamper-resistant feature to deter vandalism or theft and a smart interconnect system that connects with up to 24 Kidde devices--including other smoke alarms plus carbon monoxide and heat alarms. It has a large mounting base that helps protect surface paint from dirt and covers imperfections, and its pre-stripped wiring harness has an easy-off cap and tinned strands to increase conductivity.
By pressing the hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.
The Kidde i12020 smoke alarm uses ionization sensing technology, which generally detects invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde recommends that both ionization and photoelectric smoke alarms be installed to insure maximum detection.

What's in the Box

One Kidde i12020 120V AC wire-in smoke alarm, and operating and installation instructions.
Kidde i12020

Product Description

Kidde 21006374 Electric Smoke Alarm Ionization 120VacDust cover protects sensor from contaminates. Easy installation with large mounting base .Test/reset button .One button designKidde 21006374 Electric Smoke Alarm Ionization 120Vac Features:; Ceiling or wall mounting; Dual ionization chamber; AC power-on indicator; Solid state circuitry; Single or multiple stations; Hush control feature; 120 volt ACCompact 5-1/2" diameter 
 

Click for larger image and other views View and share related images it in action [Real Media Video] First Alert SCO501CN-3ST (Series SCO500) ONELINK Battery Operated Combination Smoke and Carbon Monoxide Alarm with Voice Location

Product Description

Amazon.com Product Description

If you want to build an integrated smoke and carbon monoxide alarm system, but without the cost and hassle of retrofit wiring in your home, the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector is an ideal choice. This alarm provides ultimate protection from two deadly threats, and it is packed with innovative features that give you precious time in the event of an emergency. And because it is able to wirelessly communicate with other ONELINK alarms, this device can help you create a whole-home safety network.


Keep your entire home safe with a network of ONELINK alarms that communicate with each other wirelessly.


ONELINK's mesh network ensures you'll hear an alarm no matter where you are in the house.

The ONELINK Combination Smoke Alarm and Carbon Monoxide Detector
At-a-Glance:
  • Allows for wireless alarm interconnectivity.
  • Dual smoke and carbon monoxide detection.
  • Loud 85-dB siren plus talking alarm for safety.
  • Photoelectric smoke sensor reduces false alarms.
  • Two 'AA' batteries included.


You'll hear the loud 85-dB siren even when sleeping or showering. View larger.
Faster Notification for Faster Escape
In the event of a fire or carbon monoxide (CO) emergency, every second counts. Unfortunately, traditional battery-operated alarms can often cost you precious time. For example, if a fire starts in your basement while you're asleep upstairs, you may not hear the smoke alarm, and it may take several minutes before the heat and smoke reaches an alarm that's close enough for you to hear its siren. Thankfully, the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector is designed to provide you the earliest warning in an emergency. When this clever device detects smoke or carbon monoxide, all integrated ONELINK alarms in your home will together, increasing your chances of getting out safely.
Interconnectivity Without the Wires
Until now, alarms that could signal each other were only available in homes with hardwired systems. All ONELINK alarms, however, communicate with each other wirelessly through integrated radio frequency. This means that when one sounds, they all sound, providing a whole-home safety network.
If you already have an existing system of hardwired alarms, but you are looking for an update, simply replace one of the alarms with the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector--your alarms will continue to be able to communicate with one another.
Talking Alarm Tells You Where the Danger Is
Not only do ONELINK wireless alarms talk to each other, but they also talk to you! Voice warning with location technology means that integrated ONELINK alarms will tell you where the danger is in your home with an actual programmable voice. For example, if there is fire in your basement, the alarm in your bedroom will speak 'Warning, evacuate. Smoke in basement." This feature will help you plan your escape method, so you can evacuate your family as safely as possible.
Accurate Technology Minimizes False Alarms
Utilizing photoelectric technology to sense smoke, the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector reduces the chance of false alarms caused by cooking or bathing.
Additionally, this alarm features an electrochemical CO sensor, which is the most accurate technology available for detecting CO.
Designed for Safety and Ease of Use
As user-friendly as it is effective, the ONELINK has a dual-purpose button that silences the alarm and tests the system's function. And because the device emits a loud 85-dB siren, you'll be sure to hear it, even if you're asleep or in the shower. The audible low-battery signal can be muted for up to eight hours (so as not to disturb your sleep).
As safe as it is easy to use, this ONELINK device is FCC compliant for wireless device standards, and it meets UL217 and UL2034 standards for combination CO and smoke alarms.

 buy now!!!

Kidde PI9010 Battery-Operated Dual Ionization and Photoelectric Sensor Smoke Alarm

Product Description

Amazon.com Product Description

The Kidde PI9000 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into one unit to offer broad detection against smoldering and flaming fires. Experts recommend that for optimal protection you have both types of sensing technology in your home. This smoke alarm's trademarked Hush feature allows you to silence nuisance alarms, while an indicator LED and test feature let you easily confirm that the alarm is working.

The Kidde PI9000 Battery-Operated Smoke Alarm:
  • Employs both photoelectric and ionization sensors.
  • Features a hush button to silence the alarm for non-emergency situations like a smoky dinner.
  • Compact design blends in seamlessly with your home decor.
  • Stand-alone battery operated alarm is easy to install throughout the home, as no wiring is needed.



With two different sensors, you'll get warnings sooner no matter the kind of fire. View larger.


Be assured of your home's safety with the PI9000 smoke alarm. View larger.
Dual-Sensor Technology for Improved Safety
Experts divide home fires into two groups: flaming and smoldering. Flaming fires result from flammable liquids and cooking accidents, while smoldering fires most often occur when smoking materials, such as cigarettes, are left unattended. Ionization smoke sensors may detect smaller, less visible fire particles, like those produced by flaming fires, sooner than photoelectric sensors. However, photoelectric sensors are may detect larger, more visible fire particles, such as those produced by smoldering fires, sooner than ionization sensors. Each must pass identical performance standards to obtain third-party approval and meet Underwriters Laboratories (UL) 217, the independent standard to which alarms are listed. Because you don't know what type of fire you will have in your home, experts recommend installing both types of technology for optimal protection.Experts Recommend Protection from Both Types of Fires
Virtually every recognized fire authority recommends the installation of both ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde offers photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which combine both technologies in one unit. Regardless of the technology, the most important thing is to ensure that you have working smoke alarms on every floor of your home, inside each bedroom and outside sleeping areas. Studies show placing alarms in both bedrooms and hallways could increase a family's escape time by up to 15 minutes.
Fire Authorities recommending both smoke alarm technologies:
  • National Fire Protection Association (NFPA)
  • International Association of Fire Chiefs (IAFC)
  • U.S. Fire Administration (USFA), the National Institute of Standards and Technology (NIST)
  • Consumer Product Safety Commission (CPSC)
  • Consumer Reports
  • National Association of State Fire Marshals (NASFM)
  • Underwriters Laboratory (UL)
  • Trademarked Hush Feature for Convenience
    By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.
    This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the Hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.
    Reliable 9-Volt Battery Power, Indicator LED, and Test Feature
    Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a test/reset button that enables you to periodically test its circuitry and horn.
    A standard 9-volt battery powers this alarm, which provides continuous protection against smoke and fire hazards even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know it's time to change the battery.
    The unit measures just 5.75 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It features tamper resist features to deter vandalism or theft.
    This dual-sensor smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty.
    About Kidde: A UTC Fire & Security Brand
    Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
    Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
    What's in the Box
    Dual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, 10-year limited warranty, and bilingual user's manual.


    The Kidde PI9000 is a breeze to operate and has a hush feature to temporarily silence alarms.

    From the Manufacturer

    70% of all home fire deaths occur in homes with no alarms or no working alarms, and nearly one quarter of smoke alarms in reported fires are not working. Both photoelectric and ionization sensors are built into this alarm, providing the best overall protection. Photoelectric sensing alarms may detect visible fire particles associated with slow smoldering fires sooner than Ionization alarms. Ionization sensing alarms may detect invisible fire particles associated with fast flaming fires sooner that Photoelectric sensing alarms. For optimal protection of both types of fire, install this Dual Sensor Smoke Alarm. This model functions as a single unit smoke alarm with Hush feature, allowing you to quickly silence nuisance alarms. Install UL listed smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. Replace smoke alarms every 10 years.


    buy now!!!

    Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White

    Product Description

    Amazon.com Product Description

    The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into one unit to offer broad detection against smoldering and flaming fires. Experts recommend that for optimal protection you have both types of sensing technology in your home. This smoke alarm's trademarked Hush feature allows you to silence nuisance alarms, while an indicator LED and test feature let you easily confirm that the alarm is working.

    The Kidde PI2010 Smoke Alarm:
    • Employs both photoelectric and ionization sensors.
    • Features a hush button to silence the alarm for non-emergency situations like a smoky dinner.
    • Compact design blends in seamlessly with your home decor.
    • Wire-in smoke alarm with 9V battery backup.



    With two different sensors, you'll get warnings sooner no matter the kind of fire. View larger.


    Be assured of your home's safety with the PI2010 smoke alarm. View larger.
    Dual-Sensor Technology for Improved Safety
    Experts divide home fires into two groups: flaming and smoldering. Flaming fires result from flammable liquids and cooking accidents, while smoldering fires most often occur when smoking materials, such as cigarettes, are left unattended. Ionization smoke sensors may detect smaller, less visible fire particles, like those produced by flaming fires, sooner than photoelectric sensors. However, photoelectric sensors are may detect larger, more visible fire particles, such as those produced by smoldering fires, sooner than ionization sensors. Each must pass identical performance standards to obtain third-party approval and meet Underwriters Laboratories (UL) 217, the independent standard to which alarms are listed. Because you don't know what type of fire you will have in your home, experts recommend installing both types of technology for optimal protection. Experts Recommend Protection from Both Types of Fires
    Virtually every recognized fire authority recommends the installation of both ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde offers photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which combine both technologies in one unit. Regardless of the technology, the most important thing is to ensure that you have working smoke alarms on every floor of your home, inside each bedroom and outside sleeping areas. Studies show placing alarms in both bedrooms and hallways could increase a family's escape time by up to 15 minutes.
    Fire Authorities recommending both smoke alarm technologies:
  • National Fire Protection Association (NFPA)
  • International Association of Fire Chiefs (IAFC)
  • U.S. Fire Administration (USFA), the National Institute of Standards and Technology (NIST)
  • Consumer Product Safety Commission (CPSC)
  • Consumer Reports
  • National Association of State Fire Marshals (NASFM)
  • Underwriters Laboratory (UL)
  • Trademarked Hush Feature for Convenience
    By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.
    This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the Hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.
    Wire-in Smoke Alarm with Reliable 9-Volt Battery Backup, Indicator LED, and Test Feature
    Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a test/reset button that enables you to periodically test its circuitry and horn.
    The PI2010 is a wire-in smoke alarm with 9V battery backup, which provides continuous protection against smoke and fire hazards even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know it's time to change the battery.
    The unit measures just 5.75 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It features tamper resist features to deter vandalism or theft.
    This dual-sensor smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty.
    About Kidde: A UTC Fire & Security Brand
    Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
    Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
    What's in the Box
    Dual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, 10-year limited warranty, and bilingual user's manual.



    The Kidde PI2010 is a breeze to operate and has a hush feature to temporarily silence alarms.

    From the Manufacturer

    The Kidde PI2010 is a 120VAC, wire-in smoke alarm with 9V battery backup. This smoke alarm functions as a stand alone unit or in an interconnected system. The Kidde PI2010 features hush, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde PI2010, 120VAC, wire-in smoke alarm with 9V battery backup provides continuous protection against smoke and fire hazards, even during power outages. The combination of ionization and photoelectric sensors offer the best protection against both fast flaming and slow smoldering fires. The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating. This unit also includes flashing LEDs to signal the alarm is functioning properly, a low battery warning and a loud 85dB alarm. The Kidde PI2010 is UL Listed and includes a ten year limited battery.

    buy now !!!

    Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup

    Product Description

    Amazon.com Product Description

    The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm offers many benefits for installers and homeowners, such as its easy-access slide load front battery door.
    This alarm is powered by your home’s electricity and will interconnect with other smoke alarms in your home. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts.
    This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.


    Firex i4618 Hardwire Smoke Alarm
    User-Friendly Features
    • Easy access slide load front
      battery door
    • Battery backup provides protection in case of a power failure
    • Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms



    Slide load front battery door provides easy access for changing battery backup. View larger.


    The i4618 smoke alarm offers easy installation features. View larger.


    Provides the recommended protection of an interconnected system. When one alarm goes off, they all do. View larger.
    Easy Installation
    • Front battery pull tab allows battery activation without removing alarm from mounting bracket.
    • Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
    • Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
    Fewer Callbacks
    • Large centrally located Test/Hush¨ alarm control button.
    • Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
    User Friendly Features
    • Easy access front loading battery door.
    • Battery backup provides protection in case of power failure.
    • Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user’s guide for complete instructions.
    Interconnectable for Improved Safety
    Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes.
    You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system.
    Interconnects with Other Devices
    Interconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality.
    Trademarked Hush Feature for Convenience
    By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.
    This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every 8 seconds while in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset after approximately 8 minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period.
    Reliable 9-Volt Battery Backup, Indicator LED, and Test Feature
    Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
    The alarm’s standard 9-volt battery provides continuous protection against smoke and fire hazards, even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know that it's time to change the battery.
    The unit measures just 5.6 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It includes tamper resist features to deter vandalism or theft.
    This alarm is UL listed, so you can be confident of its quality, and it is backed by a 5-year limited warranty.
    About Kidde: A UTC Fire & Security Brand
    Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
    Kidde is a UTC Fire & Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
    What's in the Box
    One i4618 ionization smoke alarm with mounting bracket and mounting hardware, one 9 volt battery, a 5-year limited warranty and a bilingual user's manual.

    Product Description

    The 120 volt Firex 4618 Pro Basic smoke detector has an ionization Sensor, quick connect power harness, is multi-station interconnectable, has a 5 year warranty, and is not available to members in Iowa, Oregon Or Vermont.

    buy now!!!

    Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector

    Product Description

    Honeywells 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).

    buy now!!!

    Kidde KN-COSM-IB Hardwire Combination Carbon Monoxide and Smoke Alarm with Battery Backup and Voice Warning, Interconnectable

    Product Description

    Amazon.com Product Description

    The KN-COSM-IB combines a Carbon Monoxide and Ionization Smoke Alarm, providing two important safety devices in a single unit. This alarm includes a voice warning system that helps eliminate confusion, as it tells you if its detected fire or carbon monoxide, or even if it needs a new battery. This alarm has 9 volt battery backup, which protects you and your family - even during a power outage when many incidences occur. The alarm also allows you to easily silence nuisance alarms using its convenient Smart Hush feature. This talking combo alarm is powered by your home’s electricity and can interconnect with other smoke alarms in your home. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts.

    Kidde KN-COSM-IB Hardwire
    Combination Smoke and CO Alarm
    with 9V Battery Backup
    • Employs both smoke and
      carbon monoxide sensors.
    • Inter-connectable to provide improved protection
    • Features a hush button to silence the alarm for non-emergency situations like a smoky dinner.



    Protects from two different hazards, smoke and carbon monoxide. View larger.


    Provides the recommended protection of an interconnected system. When one alarm goes off, they all do. View larger.


    Provides the recommended protection of an interconnected system. When one alarm goes off, they all do. View larger.

    Combination Smoke/CO Alarm for Improved Safety
    The Kidde Combination Carbon Monoxide & Smoke Alarm includes a voice warning system that eliminates confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement or your alarm is in hush mode.
    Alarm Warnings
    Fire: The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “Fire! Fire!” The alarm will repeat pattern until smoke is eliminated.
    Carbon Monoxide: Four short alarm beeps followed by a verbal warning “Warning! Carbon Monoxide!” This continues until the unit is reset or CO is eliminated.
    Low Battery: One chirp followed by warning “Low Battery” The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The low battery warning will only sound once every fifteen minutes.
    Voice Hush Indication: “Hush Activated” and “Hush Cancelled” voice announcement
    Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher when the Test/Reset button is pressed, the unit will announce “Carbon Monoxide Previously Detected” to warn of the CO incident.
    Inter-connectable for Improved Safety
    Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes.
    You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system.
    Trademarked Hush Feature for Convenience
    By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.
    This feature desensitizes the alarm for approximately ten minutes. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce “Hush Mode Activated,” and the green LED will flash every 2 seconds for approximately 10 minutes.
    Reliable 9-Volt Battery Backup, Indicator LED, Test Feature, Low Battery and End-of-Life Warning
    The alarm’s 9-volt battery backup provides continuous protection, even during power outages. Because this alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
    If any form of battery failure is detected the red LED light will flash and the unit will “chirp” one time, followed by the warning message “Low Battery.” This cycle will occur once every minute, and will continue for at least seven days.
    Seven (7) years after initial power up, this unit will “chirp”every 30 seconds. This is an “operational end of life” feature which will indicate that it is time to replace the alarm. UL 2034, the independent standard applicable to CO alarms, requires CO alarms to have an end of life warning. This requirement went into effect in March 2007, meaning any CO alarm manufactured after April 2007 with a UL listing must have this feature. Most states that require CO alarms in residential dwellings mandate that the alarm meet the UL 2034 standard.
    The unit measures just 5.75 inches in diameter and 1.7 inches deep, and it features a neutral, white finish. It includes tamper resist features to deter vandalism or theft. This combination smoke/CO alarm is UL listed, so you can be confident of its quality, and it is backed by a 5-year limited warranty.
    About Kidde: A UTC Fire & Security Brand
    Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
    What's in the Box
    Combination smoke and carbon monoxide alarm with mounting bracket and mounting hardware, quick-connect wiring harness, one 9 volt battery, a 5-year limited warranty and a bilingual (English/Spanish) user's manual.

    From the Manufacturer

    The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit combines a Carbon Monoxide and Ionization Smoke Alarm, providing two important safety devices in a single unit. This alarm includes a voice warning system that announces "Fire, Carbon Monoxide, Low Battery or Smart Hush Activation." The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit is hardwired and will work with many interconnected systems. This combination alarm has battery backup, protecting you and your family even during a power outage when many incidences occur. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO and Smoke alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades. Ionization sensing alarms may detect invisible fire particles associated with fast flaming fires sooner than Photoelectric alarms. Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home.

    buy now!!!

    Kidde KN-COSM-B Battery-Operated Combination Carbon Monoxide and Smoke Alarm with Talking Alarm

    Product Description

    Amazon.com Product Description

    The Kidde KN-COSM-B Battery-Operated Carbon Monoxide and Smoke Alarm combines two important safety devices into a single unit. This alarm includes a voice warning system that announces "Fire, Carbon Monoxide, Low Battery, or Smart Hush Activation." The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit uses three AA batteries, protecting you and your family even during a power outage.This alarm uses ionization sensing technology for the smoke alarm. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
    Kidde KN-COSM-B Battery-Operated Combination Smoke and CO Alarm
    • Employs both smoke and carbon monoxide sensors.
    • Stand-alone battery operated alarm is easy to install throughout the home, as no wiring is needed.
    • Features a hush button to silence the alarm for non-emergency situations like a smoky dinner.
    • Voice alarm eliminates confusion and clearly warns of smoke/CO danger or low battery.


    Protects from two different hazards, smoke and carbon monoxide and has a different voice warning for each hazard. View larger.

    Fire voice warning: View Movie

    Carbon monoxide voice warning: View Movie


    The battery operated KN-COSM-B offers easy installation. View larger.
    Combination Smoke/Carbon Monoxide Alarm
    The Kidde Combination Carbon Monoxide & Smoke Alarm includes a voice warning system that eliminates confusion and clearly warns you and your family of a smoke or carbon monoxide (CO) danger, or if your battery is in need of replacement or your alarm is in hush mode.Alarm Warnings
    Fire: The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message "Fire! Fire!" The alarm will repeat the pattern until smoke is eliminated. View movie showing voice warning
    Carbon Monoxide: Four short alarm beeps followed by a verbal warning "Warning! Carbon Monoxide!" This continues until the unit is reset or the CO is eliminated. View movie showing voice warning
    Low Battery: One chirp followed by warning "Low Battery." The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour, the red LED light will flash once every minute and will be accompanied by the chirp sound. The "Low Battery" warning will only sound once every fifteen minutes.
    Voice Hush Indication: "Hush Activated" and "Hush Canceled" voice announcement.
    Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher when the Test/Reset button is pressed, the unit will announce "Carbon Monoxide Previously Detected" to warn of the CO incident.
    Trademarked Hush Feature for Convenience
    By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.
    This feature desensitizes the alarm for approximately 10 minutes. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce "Hush Mode Activated", and the green LED will flash every 2 seconds for approximately 10 minutes.
    Reliable Battery Power, Indicator LED, Test Feature and Low-Battery Warning
    The battery powered alarm provides continuous protection, even during power outages. Because this alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
    If any form of battery failure is detected the red LED light will flash and the unit will "chirp" one time, followed by the warning message "Low Battery." This cycle will occur once every minute, and will continue for at least seven days.
    Seven (7) years after initial power up, this unit will "chirp" every 30 seconds. This is an "operational end of life" feature which will indicate that it is time to replace the alarm. UL 2034, the independent standard applicable to CO alarms, requires CO alarms to have an end of life warning. This requirement went into effect in March 2007, meaning any CO alarm manufactured after April 2007 with a UL listing must have this feature. Most states that require CO alarms in residential dwellings mandate that the alarm meet the UL 2034 standard.
    The unit measures just 5.75 inches in diameter and 1.7 inches deep, and it features a neutral, white finish. It includes tamper resist features to deter vandalism or theft. This combination smoke/CO alarm is UL listed, so you can be confident of its quality, and it is backed by a 5-year limited warranty.
    About Kidde: A UTC Fire & Security Brand
    Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
    What's in the Box
    Combination smoke and carbon monoxide alarm with mounting bracket and mounting hardware, three AA batteries, a 5-year limited warranty and a bilingual (English/Spanish) user's manual.


    From the Manufacturer

    The leading cause of accidental poisoning deaths in North America, carbon monoxide is odorless, tasteless, and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit combines a carbon monoxide and an ionization smoke alarm, providing two important safety devices in a single unit. This alarm’s voice warning system announces "Fire, Carbon Monoxide, Low Battery, or Smart Hush Activation." The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or! carbon monoxide danger, or if your battery is in need of replacement. This combination alarm is battery operated, protecting you and your family even during a power outage when many incidences occur. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO and smoke alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades and replace smoke alarms every ten years.

    buy now!!!